Commercial Pressure Washing: Case Study 2

Illustrative composite based on typical scenarios. Names, companies, and figures are representative examples, not a specific verified customer.

Every commercial pressure washing job around Metro Detroit starts the same way: a walkthrough, a look at the surfaces, and a straight answer about what pressure each one can actually take. This case study is a composite — a representative example of how a typical exterior cleaning project unfolds at a commercial property. Best Choice Janitorial Services is commercial-only. We don't do residential work, full stop.

The Situation

Picture a mid-size commercial property — the kind that mixes office space with a little retail or light industrial use. The entrance concrete is gray with traffic film. The dumpster pad holds grease and standing grime. The loading dock carries tire scuff and salt residue. Shaded walkways have algae slicks, and the brick facade shows dark streaks where runoff hits it.

None of it is catastrophic. All of it reads as neglect to a prospective tenant, a customer, or an inspector. That's usually what triggers the call: not disaster, but slow accumulation an owner notices all at once.

The Walkthrough

We don't quote firm prices over the phone — the range is too wide to guess at. An on-site walkthrough tells us the surface mix, square footage, how heavy the soiling is, where water comes from, and where it drains. A greasy dumpster pad and a streaked brick wall are different jobs with different methods, and they get priced as such. For the full service breakdown, see our commercial pressure washing overview.

The Approach: Pressure Matched to the Surface

Pressure gets matched to the surface. That's the whole game.

Concrete flatwork — entrances, docks, dumpster pads — tolerates higher pressure and hot water where grease is involved. Masonry does not. Brick and stone get low pressure and the right detergent, because too much pressure cuts mortar joints and can chew the face off soft brick. Wood, painted surfaces, and anything near glazing or seals gets soft washing: chemical clean, gentle rinse.

An operator who runs one pressure setting across every surface will damage something. Repairing blown-out mortar or furred wood costs far more than the cleaning ever did, and it's the main reason to hire a crew that works on commercial buildings and knows how they're put together.

Michigan Scheduling

Pressure washing in Michigan is seasonal. Freezing temperatures limit scheduling — water on a walkway in freezing weather turns to ice and becomes a slip liability, and equipment can freeze. The practical window runs roughly spring through late fall.

Properties that want clean entrances and docks for spring leasing season should book in late winter. Fall is the other smart window: clear the year's buildup before winter locks everything down.

What an Owner Should Expect

Cost drivers, in rough order of weight: square footage, surface mix, degree of soiling, access (heights, tight rear docks), water source, and travel. A small entrance-and-pad cleanup sits at the low end of the range. A full exterior wash of a large building runs to multiples of that. We won't put a firm number on either without seeing it, and any company that does is guessing.

Scope boundaries worth knowing: all work is commercial — offices, hospitals and medical facilities, industrial and manufacturing buildings, schools, retail, and any commercial property. No residential. Kitchen exhaust hood and duct cleaning is a separate certified trade we don't offer; that work goes to certified specialists.

Get a Walkthrough, Not a Guess

If your Metro Detroit commercial property needs pressure washing, we'll walk the site, tell you what each surface can take, and quote from what we actually see — never a number pulled from the air.

Request an on-site walkthrough at jan.bestchoice411.com. Commercial properties only.