Floor Stripping and Waxing: Case Study 2

Illustrative composite based on typical scenarios. Names, companies, and figures are representative examples, not a specific verified customer.

This is a composite floor stripping and waxing scenario built from the kind of calls we take across Metro Detroit. No real client, no real figures — just the shape of the job, so you can recognize your own floor in it. Best Choice Janitorial Services is a commercial-only operation: offices, medical facilities, schools, retail, industrial buildings. Never residential.

The Situation

Picture a mid-size commercial entryway and an adjoining hallway. VCT tile, originally finished well. Years of mopping with the wrong product, winter salt tracked in from Metro Detroit parking lots, and a buff-only maintenance routine that polished the dirt instead of removing it. The finish has yellowed in the walk paths, gone grey at the edges, and started to peel where carts cross.

That's the classic trigger. The floor doesn't need cleaning anymore — it needs stripping and waxing. Once old finish is yellowed, peeling, or won't take a buff, adding more product just seals the problem in.

The Approach

The job runs in a fixed sequence:

  1. Strip. Chemical stripper and a floor machine loosen the old finish; a wet vac pulls it up. Heavily built-up floors may need a second strip pass.
  2. Rinse and neutralize. Leftover stripper keeps new finish from adhering, so the floor gets rinsed until it's clean.
  3. Dry. The floor must be completely dry before the first coat.
  4. Coats. Fresh finish goes down in thin coats, with dry time between each.

Coat count isn't a guess. A light-traffic office floor in decent condition takes fewer coats. A retail entrance, school corridor, or hospital hallway — heavy traffic, moisture, rolling equipment — takes more. Floor condition matters too: a floor stripped back to bare tile needs extra coats to rebuild the wear surface.

Why It Happens After Hours

Floor stripping and waxing is almost always scheduled nights or weekends, and the reason is simple: the floor has to stay clear while the coats cure. Traffic across a wet or half-cured coat leaves tracks that don't buff out. Crews work section by section, and the building goes back into service once the final coat has cured — typically the next morning after a night job.

What Drives the Cost

Every stripping and waxing price is built from the same variables: square footage, how many strip passes the old finish needs, coat count, and site access. A small, well-maintained area sits at the low end of the range. A large, neglected floor needing multiple strip passes and extra coats sits at the high end. That's why Best Choice Janitorial never quotes a firm price without an on-site walkthrough. Anyone who does is guessing.

What an Owner Should Expect

For the full process breakdown, see the floor stripping and waxing guide.

Next Step

A yellowed, dull, or patchy floor is past the cleaning stage. Best Choice Janitorial Services handles commercial floor stripping and waxing across Metro Detroit — offices, hospitals and medical facilities, schools, retail, and industrial buildings. No residential work. Request an on-site walkthrough at jan.bestchoice411.com and we'll tell you straight what the floor needs.