Floor Stripping and Waxing: Case Study 3

Illustrative composite based on typical scenarios. Names, companies, and figures are representative examples, not a specific verified customer.

This case study walks through a typical floor stripping and waxing project on a commercial property in Metro Detroit. The building, the timeline, and the details are representative — no client names, no invented numbers. What follows is the shape of the problem, how the work gets done, and what a building owner should realistically expect when the finish on a hard floor has run its course.

The Shape of the Problem

Most hard commercial floors — VCT in retail and schools, sealed concrete or terrazzo in industrial and institutional buildings — get maintained with mop-and-buff cycles. Over months, that fails in a predictable way:

At that point, routine buffing stops paying. The old finish has to come off completely. That is what stripping and waxing is: chemical strip, machine scrub, rinse, then rebuild the finish from bare floor up.

The Approach

Walkthrough first. Measure square footage, check the depth of the buildup, note tile damage that needs repair, and identify furniture that has to move. That walkthrough drives the whole scope — coat count, crew size, and schedule.

After-hours scheduling. This work is almost always done at night or on weekends. Once coats start going down, the floor must stay completely clear while the finish cures. Foot traffic during cure means tracked-in debris and footprints set into the finish permanently. Crews work in zones so the building stays functional.

Strip and rinse. Stripper goes down, dwells, gets machine-scrubbed with aggressive pads, wet-vacuumed, and hand-detailed along edges. Then a thorough rinse so the new finish bonds properly. Skip the rinse and the new coats peel.

Coats go on thin. Finish is laid in thin, even coats, each drying before the next — typically 30 to 45 minutes per coat depending on humidity and airflow. The number of coats depends on traffic and floor condition: a light-traffic office may need fewer, a heavy-traffic entry or retail aisle more. Three to five coats is a normal working range.

What an Owner Should Expect

Costs move with square footage, coat count, existing buildup, furniture moving, and night or weekend scheduling. We do not quote firm prices — every job is priced after an on-site walkthrough.

Scope Notes

All of this work is commercial — offices, hospitals and medical facilities, industrial and manufacturing buildings, schools, and retail. No residential. One related point: hood and duct cleaning is a separate certified trade and is not something Best Choice Janitorial Services offers. If a commercial kitchen floor job opens that conversation, that portion goes to a certified specialist.

For the full process breakdown, see the floor stripping and waxing guide.


Schedule a Walkthrough

Best Choice Janitorial Services handles floor stripping and waxing across Metro Detroit, along with general commercial cleaning, carpet and upholstery cleaning, pressure washing, appliance cleaning, commercial kitchen steam cleaning, and full commercial janitorial programs. Every price starts with an on-site walkthrough — never a firm quote over the phone. Request one at jan.bestchoice411.com.