Is Floor Stripping and Waxing disruptive to a working building?

No — not when the job is scheduled properly. "Is floor stripping and waxing disruptive to a working building" is really a question about timing, and timing gets settled before a crew ever loads the van. Here's what actually happens on site.

When is the work done?

Almost all floor stripping and waxing in occupied buildings runs after hours, on weekends, or in low-traffic windows. The reason is simple: once each coat of finish goes down, the floor has to stay completely clear of foot traffic until it cures. Walking on a wet or still-soft finish dulls it, tracks it, and can mean redoing sections.

A standard sequence — strip, rinse, dry, then multiple coats with dry time between each — usually fits an overnight window. In most cases the floors are back in service by opening time.

How many coats does a floor need?

There's no fixed number. Coat count depends on traffic levels and the condition of the floor. A back office with light foot traffic needs fewer coats than a retail entrance, a school corridor, or a hospital hallway that takes abuse all day. Heavily worn floors may also need extra prep before any wax goes down at all. For the full process, start with our floor stripping and waxing guide.

What does it cost?

No honest number exists without seeing the floor. The cost drivers are square footage, coat count, the condition of the old finish, and accessibility — furniture, fixtures, and tight rooms all add labor. Best Choice Janitorial Services quotes commercial work only after an on-site walkthrough, never over the phone.

All work is commercial: offices, hospitals and medical facilities, industrial and manufacturing buildings, schools, retail, and any commercial property in Metro Detroit. No residential jobs.


Need floors stripped and waxed without shutting down your building?

Best Choice Janitorial Services schedules floor work around your hours, not against them. Book an on-site walkthrough at jan.bestchoice411.com.