Cleaning during an office renovation

Renovation dust doesn't stay in the renovation zone. It rides the HVAC, settles on desks three floors away, and lands in places your regular janitorial crew isn't equipped to handle. Cleaning during an office renovation is its own job — part dust control, part logistics, part damage prevention — and treating it like business as usual is how buildings end up with scratched floors, dead vacuums, and complaints from tenants who never asked to be part of the project.

Here's what needs to happen before, during, and after a commercial renovation, written for the facility managers and owners running the job.

Why renovation cleaning isn't routine cleaning

A standard commercial cleaning contract assumes a stable building: same surfaces, same traffic, same soil load. A renovation breaks all three. Sheetrock dust is abrasive and fine enough to pass straight through consumer-grade vacuum filters. Adhesives, paint overspray, and construction debris call for different chemistry and heavier equipment than coffee spills and tracked-in dirt.

Two things change immediately: the frequency of cleaning in occupied areas near the work, and the scope of cleaning once the work wraps. Plan for both before demo day.

Before the contractors arrive

A pre-renovation clean pays for itself:

While the work is underway

During construction, cleaning is about controlling the spread, not achieving polish:

One warning: construction dust destroys residential-grade equipment. If your current provider is running lightweight machines, expect failures mid-project.

Post-construction cleanup: three passes

Skipping a pass shows. The sequence matters:

  1. Rough clean. Debris out, protective film and stickers off, worst of the dust down while trades are still finishing.
  2. Light clean. Detailed dusting of everything — walls, window frames, fixtures, baseboards, inside cabinets — plus glass. This pass takes the longest, because fine dust settles on horizontal surfaces nobody thinks about: door tops, ceiling grid, light fixtures.
  3. Final clean. Floors last, walk-through inspection, touch-ups, restrooms and break areas made ready for occupancy.

Carpets and upholstery almost always need attention afterward. Fine dust works down into carpet pile and keeps coming back up for weeks if it isn't extracted properly. Floor stripping and waxing is common after renovations too — construction traffic chews through finish, and tracked debris scratches what's left.

What drives the cost

Nobody can price this flat, because scope varies enormously. The cost drivers:

Post-construction cleaning commonly runs at a multiple of routine commercial cleaning rates — debris-only touch-ups at the low end, full three-pass programs with floor refinishing at the high end. The only honest number comes from walking the space.

Scope check: what a cleaning contractor does and doesn't do

A commercial janitorial contractor can handle general cleaning, floor stripping and waxing, carpet and upholstery cleaning, pressure washing, appliance cleaning, and commercial kitchen steam cleaning. If your renovation touches a commercial kitchen, note that hood and duct cleaning is a separate certified trade — confirm who owns that line item, because general cleaning companies don't perform it.

Get a walkthrough on the calendar

Best Choice Janitorial Services — commercial-only cleaning serving Metro Detroit. Offices, hospitals and medical facilities, industrial and manufacturing buildings, schools, retail, and any commercial property. Renovation and post-construction cleaning, floor care, carpet and upholstery, kitchen steam cleaning, pressure washing, and full janitorial programs.

Pricing follows an on-site walkthrough. No phone quotes, no guesses, no residential work.

Request a walkthrough