Floor Stripping and Waxing in Auburn Hills, MI

Commercial tile floors don't wear out — the finish on top of them does. Buffing buys time, but eventually the old wax yellows, traffic lanes go grey, and dirt works into the scratches. That's when you need floor stripping and waxing in Auburn Hills MI: the old finish comes off down to bare tile, then the floor is resealed and recoated so it looks new again. Best Choice Janitorial Services does this work commercial-only — offices, industrial and manufacturing buildings, medical facilities, schools, retail, and any other business property in Metro Detroit.

What the job actually involves

Stripping isn't deep scrubbing. A chemical stripper breaks down the old layers of finish, a machine agitates and lifts them, and the slurry gets wet-vacced off. What's left is bare tile. From there the floor gets rinsed — leftover stripper stops new finish from bonding — dried, sealed if needed, and recoated with fresh finish.

The recoat is the point. Bare VCT is porous and stains fast, so a strip without a proper rebuild leaves the floor worse off than when you started.

Why the work usually runs after hours

Every coat needs time to cure before it takes traffic, and wet finish plus a workday is a slip hazard. So crews work nights and weekends for three reasons:

  1. The floor has to stay completely clear while coats dry and cure.
  2. Furniture, fixtures, and equipment have to come off the tile first anyway.
  3. If a corridor or entrance can't be closed, the job gets phased — half one night, half the next — so the building keeps its exits.

Coat count follows traffic and condition

Finish is sacrificial. It's built up in layers so it takes the wear instead of the tile.

Most commercial jobs land between three and six coats after sealing. Traffic level and floor condition set the number, not a fixed package.

What drives the cost

We don't quote firm prices sight unseen — no honest contractor can. The number moves with:

A two-coat refresh on a small entry costs a fraction of a full strip and five-coat rebuild on a worn warehouse floor. That spread is exactly why pricing always starts with an on-site walkthrough.

Who this is for

Auburn Hills sits in a hard-working stretch of Metro Detroit: automotive and supplier facilities, distribution and warehousing, medical offices, corporate offices, retail, and schools. If it's a commercial property, it's in scope. No residential work — no houses, no apartments. For everything we cover in the area, see the Auburn Hills, MI service page.

For the full process in detail — chemicals, equipment, dry times, and maintenance cycles between strips — read the stripping and waxing guide.


Ready when your floors are. Contact Best Choice Janitorial Services through jan.bestchoice411.com to schedule an on-site walkthrough in Auburn Hills or anywhere in Metro Detroit. We'll measure the floor, check the existing finish, and tell you straight what it needs — coat count and all. No firm price until we've seen it in person.