Floor Stripping and Waxing in Canton, MI

Commercial floor stripping and waxing in Canton MI is the deep version of hard-floor care. It's not buffing and it's not a mop-and-shine. Stripping takes the floor back to bare tile — every layer of old finish, the embedded dirt, the yellowing buildup — then rebuilds it with fresh sealer and new coats of finish. Best Choice Janitorial Services does this work for commercial property only, running crews across Metro Detroit, including Canton, MI. If your tile has gone dull, yellow, or patchy no matter how often it gets mopped, this is the fix.

What the Job Involves

Old finish does not come off with a mop. The crew applies chemical stripper, gives it dwell time to break down the buildup, then scrubs it loose with a rotary machine and aggressive pads. The slurry gets wet-vacuumed up, the floor is rinsed and neutralized, and only then — once we're down to clean, bare tile — do we re-seal and start laying fresh coats. Rush the stripping step and the new finish bonds to dirt instead of tile, which is why floors done cheaply look bad again within months. The full method is laid out in our main floor stripping and waxing guide.

Why the Work Happens After Hours

Floor finish has to cure undisturbed. Foot traffic, wheeled carts, chair legs, or anything dragged across a coat that's still soft will mark it, and the marks don't buff out. Each coat also needs dry time before the next one goes down, so a full strip-and-wax runs through the night, not over a lunch break. We schedule the work for nights and weekends so the floor is ready for business the next morning. One ask: keep deliveries, vendors, and other crews off the floor until the cure window closes.

How Many Coats the Floor Needs

There is no fixed number. Coat count depends on traffic and the condition of the floor. A low-traffic office corridor can hold up with fewer coats. Entrances, retail aisles, hospital corridors, and school hallways take more, because finish is sacrificial — it's the layer that wears so the tile doesn't. A floor that's being stripped because the old finish failed may also need extra coats to rebuild protection. We make that call during the walkthrough, not over the phone.

What the Job Costs

We don't quote firm prices without seeing the floor — that's policy, not a sales tactic. The number moves with square footage, how many coats come off, how many go back on, whether furniture or fixtures need moving, and site access: water, power, and the ability to work after hours. A small entry vestibule and a 30,000-square-foot warehouse floor are entirely different jobs. After an on-site walkthrough, you get a number based on your floor, not a guess.

Who This Is For

Commercial only. In Canton that means offices, hospitals and medical facilities, industrial and manufacturing buildings, retail stores, schools, and any other commercial property. No residential work — not as an add-on, not as a favor. Stripping and waxing often rides along with our general commercial cleaning and full janitorial programmes, but we also quote it as a standalone project. Related work — pressure washing, appliance cleaning, commercial kitchen steam cleaning, carpet and upholstery cleaning — sits in the same programme. One honest limitation: kitchen hood and duct cleaning is a separate certified trade, and we don't offer it.

Get a Walkthrough on the Calendar

Ready to price the job? Best Choice Janitorial Services quotes every floor stripping and waxing project after an on-site walkthrough of your Canton facility. Visit https://jan.bestchoice411.com to request one. We'll measure the floor, check the existing finish, and tell you straight what it needs — coats, timing, and a number that holds.