Floor Stripping and Waxing in Fraser, MI

If you run a commercial property in Fraser, Michigan, and your tile floors have gone yellow, scuffed, or dull no matter how often they get mopped, that's not a dirt problem. That's a finish problem. Floor stripping and waxing in Fraser MI is the fix: we take the floor back down to bare tile and build the finish up fresh, so the floor looks new again instead of just cleaned.

Best Choice Janitorial Services is a commercial-only cleaning company serving Metro Detroit. This page covers what the job involves, why we schedule it after hours, and what actually drives the price.

What the Job Actually Involves

Floor stripping and waxing is a full reset, not a mop-and-shine. The process breaks down like this:

  1. Strip. Apply chemical stripper to break down the old layers of floor finish, agitate with a floor machine, and remove the slurry with a wet vac. The goal is bare tile — every bit of old wax off, edges and corners included.
  2. Rinse and neutralize. Leftover stripper residue keeps new finish from adhering, so the floor gets rinsed and neutralized before anything goes back down.
  3. Seal and re-coat. Once the tile is clean and dry, we lay down sealer and fresh coats of finish — thin coats, with dry time between each one.

Done right, the floor comes back to a shine you can't get from buffing alone. For the full process breakdown, see our main floor stripping and waxing guide.

Why It Has to Happen After Hours

Every coat needs cure time, and the floor has to stay completely clear while that happens. Foot traffic on finish that hasn't cured tracks dirt into the coating, leaves scuffs, and can haze the whole job. Multiple coats plus dry time between each means the area is out of service for hours, not minutes.

That's why this work normally runs nights or weekends. Your doors open the next business day to a finished floor, not a wet one. We sequence the job so high-traffic routes go last, or get done in sections, so your building never has to fully close.

How Many Coats Your Floor Needs

There's no fixed answer — it depends on traffic and the condition of the floor:

Most of our commercial jobs land in the three-to-five coat range, but we make that call after seeing the floor. Finish worn through to bare tile, or yellowed from age and buildup, changes the math.

What Drives the Cost

We don't quote floor stripping and waxing over the phone, because the variables are real:

Every quote follows an on-site walkthrough. That's the only honest way to price it.

Commercial Only, No Exceptions

We do this work for offices, hospitals and medical facilities, industrial and manufacturing buildings, schools, retail spaces, and any commercial property in Fraser MI and across Metro Detroit. We don't take residential jobs — not kitchens, not garages, not basements. If it isn't a commercial property, we're not the right fit, and we'll tell you straight.


Get a Walkthrough on the Books

Want the floors at your Fraser property evaluated? We'll come out, look at the tile, walk the traffic patterns, and give you a straight answer on what the job takes — coats, timeline, and price.

Request your on-site walkthrough at jan.bestchoice411.com.

Commercial properties only. No residential work.