Floor stripping and waxing in Inkster, MI is standard maintenance for any commercial property with vinyl composition tile or similar resilient floors. The old finish comes off down to bare tile, the floor gets sealed, fresh coats go on, and the floor looks new again. Put it off long enough and no amount of buffing will save it. Here's how the job works, why it runs after hours, and what drives the cost.
Stripping removes the old floor finish completely — down to the tile itself. A chemical stripper is applied, given time to break down the buildup, machine-scrubbed loose, wet-vacuumed, then rinsed and neutralized so the new coats bond properly.
Waxing — most crews just call it finishing — is laying down thin, even coats of sealer and finish, with each coat dried before the next goes on. Coats laid over dirty or unneutralized tile will yellow and peel, and you'll be stripping again far sooner than you should be.
Burnishing maintains a finish that's still sound. It doesn't replace one that's worn through. If the traffic lanes are down to bare tile or the edges are flaking, it's a strip job.
Every coat needs dry time, and the finished floor needs cure time with nothing on it. No foot traffic, no carts, no furniture dragged back into place. Walk a floor before the finish has cured and those marks are in it for good — most finishes want heavy traffic held off for at least a day.
That's why floor stripping and waxing in Inkster is a nights-and-weekends job: offices after staff goes home, retail after close, school hallways over breaks. In buildings that never close — hospitals, urgent care, some industrial sites — the work gets done in sections so the rest of the floor stays in service.
There's no fixed number. It depends on traffic and floor condition:
As a general rule, commercial floors land in the three-to-five coat range, with heavier builds on high-traffic lanes. Specifying coat count is one of the clearest cost levers in either direction — decide it before the quote, not during the job.
We don't give firm prices without seeing the floor, and honestly, neither should anyone else. The variables:
Pricing scales per square foot, with condition and coat count moving the number up or down. The only honest way to price it is an on-site walkthrough.
Best Choice Janitorial Services is a commercial-only cleaning company serving Metro Detroit. Floor stripping and waxing is one line of work alongside general commercial cleaning, carpet and upholstery cleaning, pressure washing, appliance cleaning, commercial kitchen steam cleaning, and full commercial janitorial programmes. Customers range from offices, hospitals, and medical facilities to industrial and manufacturing buildings, schools, retail, and any other commercial property around Inkster — the Michigan Avenue corridor, Middlebelt, and the industrial stretches in between. No residential work, period.
On a question that comes up regularly: kitchen hood and duct cleaning is a separate certified trade. It's not something we offer, and we won't pretend otherwise.
For the full process — chemistry, equipment, cure times, and interim maintenance between strips — see our pillar guide on stripping and waxing. For everything else we cover in the area, start with Inkster, MI.
Every quote starts on-site: we look at the floor, the traffic pattern, and the schedule, then price the job. No phone quotes, no firm numbers sight unseen.
Request a walkthrough at https://jan.bestchoice411.com. Commercial properties in Inkster, MI and across Metro Detroit only.