Floor stripping and waxing in Northville MI is commercial work — offices, retail, medical buildings, schools, industrial facilities. No houses. Best Choice Janitorial Services runs strip-and-wax jobs across Metro Detroit, and this page covers what the work involves, why it happens after hours, and what drives the price. For the full process breakdown, start with the floor stripping and waxing guide.
Two jobs, really.
First, stripping. A chemical stripper goes down, a floor machine works it in, and the crew wet-vacs the slurry out. The goal is every last bit of old finish off — down to bare tile. Miss spots and the old finish telegraphs through the new one: yellowing, scuffs, dull patches no amount of buffing will fix.
Then re-sealing and re-coating. Once the floor is rinsed, neutralized, and completely dry, fresh coats of finish go down in thin, even layers. Each coat builds the film that protects the tile and gives you the shine. Done right, an old VCT floor reads as new to anyone walking in the door.
One terminology note: the "wax" in the name is legacy. What goes down today is polymer floor finish, but everyone in the trade still calls it wax.
Finish needs time. Each coat has to dry before the next goes on — figure 20 to 30 minutes minimum per coat, longer in humid Michigan summers. The final coat needs real cure time before it takes traffic, which usually means the floor stays clear overnight, sometimes into the next morning.
That's why strip-and-wax work happens nights and weekends. Foot traffic, carts, or furniture set down on soft finish leaves marks that stay there. If you run a store or a clinic, plan on a closed floor from strip-down to full cure.
No fixed answer — it depends on traffic and the condition the floor is in.
A low-traffic office interior might be fine with three coats. A retail entrance, a school hallway, or a hospital corridor takes a beating, so four to five coats — sometimes more on high-wear lanes — buys a thicker film and a longer cycle before the next service. More coats means more product and more labor, and that shows up in the price.
We don't quote firm prices without seeing the floor. Every job is priced after an on-site walkthrough. Here's what moves the number:
For planning purposes only, commercial strip-and-wax work in Metro Detroit generally lands somewhere in the range of $1 to $2 per square foot, with small floors or heavy buildup running above that. Treat that as a budgeting range, not a quote.
Northville's commercial stock runs from small offices and storefronts near downtown out to medical and dental buildings, schools, and industrial and manufacturing properties toward the highway corridors and the Novi and Plymouth edges. All of it is in scope — see the full service list on the Northville, MI city page.
And to be plain about it: this is commercial-only work. No residential floors, no garages, no homes.
If the floors in your Northville building are yellowed, scuffed, or past the point where buffing helps, the next step is simple: we come out, look at the floor, measure it, and give you a real number.
Request a walkthrough at jan.bestchoice411.com. Commercial properties in Northville and across Metro Detroit. No firm price until we've seen the floor — that's how an honest quote works.