Floor Stripping and Waxing for Industrial and Manufacturing Buildings

Floor stripping and waxing for industrial and manufacturing buildings is restoration work, not janitorial upkeep. A production floor takes abuse an office floor never sees: forklifts, pallet jacks, oil, coolant mist, and shift traffic around the clock. Old finish yellows, scratches through to bare tile, and packs grime into the floor. Stripping and waxing takes the floor down to the tile and rebuilds the finish so it looks new, cleans easily, and resists wear again. Below: how the process works inside a working plant, how many coats your floor needs, and what drives the cost.

What the Process Actually Is

This is a full removal and rebuild, in three stages:

  1. Strip. Chemical stripper goes down, gets agitated with a rotary machine, and is vacuumed off wet — along with every coat of old finish. The target is bare tile: no wax, no yellowing, no patched-through spots. Heavy industrial buildup often takes multiple passes, especially where oil has worked into the finish.
  2. Seal. The stripped floor is rinsed and neutralized, then sealed. The sealer fills the tile's pores and gives the finish something to bond to.
  3. Coat. Layers of floor finish go on one at a time, with drying time between coats. This is the wear surface — the layer that takes the abuse so the tile doesn't.

Done right, the floor reflects light, releases dirt to a mop instead of holding it, and gives better footing than a worn one.

Why Plant Floors Are a Different Job

In industrial settings, most of this work is on vinyl composition tile (VCT) — offices, labs, break rooms, hallways, and assembly aisles. The process doesn't change from an office building; the conditions do:

Why the Work Runs After Hours

The hard rule: the floor stays completely clear — no feet, no forklifts, no pallets — while each coat dries and the new finish cures. One set of boot prints or one tire mark through a wet coat means stripping that section and starting over.

That's why this work is scheduled after hours, overnight, or on weekends in industrial and manufacturing buildings. Drying time between coats depends on airflow and humidity, and the finished floor generally needs to stay off-limits overnight at minimum before regular traffic resumes.

If your operation runs around the clock, the job gets phased — one zone at a time, offices one night, a section of aisle the next — so production never stops. That plan gets built on the walkthrough.

How Many Coats the Floor Needs

There's no fixed number; coat count follows traffic and floor condition:

More coats mean more product and labor, which raises cost — and the floor holds up longer between services. In heavy traffic, the extra coats usually buy more time than they cost.

What Drives the Cost

We don't quote firm prices sight unseen, and neither should anyone else in this trade. Every number follows an on-site walkthrough. What the walkthrough measures:

Two plants with identical square footage can land far apart on price based on condition and coats alone — which is exactly why the walkthrough comes first.

For the broader picture on maintaining production facilities, see our pillar page on industrial and manufacturing buildings.

Who Does This Work in Metro Detroit

Best Choice Janitorial Services is a commercial-only cleaning company serving Metro Detroit — no residential work, period. Beyond floor stripping and waxing, our services include general commercial cleaning, appliance cleaning, commercial kitchen steam cleaning, pressure washing, carpet cleaning, upholstery cleaning, and full commercial janitorial programmes. Alongside industrial and manufacturing buildings, we serve offices, hospitals and medical facilities, schools, retail, and any commercial property.

One boundary to state plainly: hood and duct cleaning is a separate certified trade, and we don't offer it. Kitchen exhaust work needs a certified specialist, not a janitorial crew.


Book the Walkthrough

If the finish on your plant floor is yellowed, worn through, or holding dirt a mop can't touch, a full strip and recoat brings it back. We'll walk the floor with you, read the traffic and condition, and tell you straight what it needs — coat counts, schedule, and a price built from your building, not a guess.