Floor stripping and waxing for office buildings is restoration work, not routine cleaning. When the finish on a lobby or hallway has yellowed, worn through in traffic lanes, or stopped responding to buffing, the fix is to strip everything off down to the tile and start fresh. This page covers how the process works in an office environment, why it almost always happens after hours, how many coats a floor needs, and what actually drives the price.
Most office buildings in Metro Detroit run vinyl composition tile (VCT) in lobbies, corridors, break rooms, and restrooms. That finish takes a beating: foot traffic, chair casters, delivery carts, and grit tracked in from the parking lot all grind it down. Daily mopping helps, but it doesn't rebuild the finish — it just delays the inevitable. Once the wax yellows or wears through, buffing is polishing a dead surface. Stripping and rewaxing is the only thing that brings the floor back.
Stripping and waxing is a multi-step job with no shortcuts:
Done right, the floor looks new again — not just shiny, but uniform, with scuffs and yellowing gone.
This is almost always night or weekend work, and it comes down to cure time. Each coat needs to dry before the next one goes on, and the floor has to stay completely clear while the coats cure. Light foot traffic the next morning is usually fine, but heavy furniture, equipment, and rubber-backed mats should wait a day or two for the finish to fully harden.
Trying to run this during business hours in an occupied office doesn't work. You can't route a lobby's foot traffic through a stripping zone. Crews work after the building empties out so the finish cures undisturbed and tenants walk into a finished floor.
There's no fixed answer — coat count depends on traffic and floor condition:
More coats mean more durability and longer time between strips, but also more labor and material. That tradeoff gets sorted out on the walkthrough.
We don't quote firm prices without seeing the floor, and neither should anyone else. The variables that move the number:
In commercial markets, pricing generally lands somewhere in a per-square-foot range that widens or narrows based on those factors. The only number that matters is the one you get after someone has actually stood on the floor.
A full strip is the reset button, not the routine. Interim buffing, spray buffing, and a periodic scrub-and-recoat on high-traffic lanes stretch the life of the finish and push full strips further apart. A floor that's on a maintenance cycle strips faster and cheaper than one that's been ignored for years.
Best Choice Janitorial Services handles floor stripping and waxing, general commercial cleaning, carpet and upholstery cleaning, appliance cleaning, commercial kitchen steam cleaning, pressure washing, and full janitorial programs — for offices, hospitals and medical facilities, industrial and manufacturing buildings, schools, retail, and any commercial property. No residential work. For the bigger picture on maintaining office properties, see our pillar page on janitorial services for office buildings.
Get a walkthrough, get a real number.
Best Choice Janitorial Services is a commercial-only cleaning company serving Metro Detroit. Every stripping and waxing quote starts with an on-site walkthrough — no phone estimates, no guesswork.
Request your walkthrough: jan.bestchoice411.com