Most of the common mistakes with floor stripping and waxing come down to one thing: impatience. Someone cuts the dwell time, skips a rinse, or lets foot traffic back on before the finish has cured, and the floor pays for it for months. If you manage commercial property, knowing where these jobs go wrong helps you spot a sloppy crew before you hire one — and helps you set realistic expectations around scheduling, coats, and cost. Here's what goes wrong, job after job.
Finish bonds to the tile, not to old wax. When a crew waxes over buildup, embedded dirt, or leftover stripper residue, the new coats yellow and peel within weeks. You'll see it first along the baseboards and at the seams, where old finish hides. A proper strip means the right pad, enough stripper solution, and enough passes to get down to bare tile. If the floor still looks cloudy after stripping, waxing will lock that in — not hide it.
Stripper needs dwell time to break the old finish. Spray it on and immediately run the machine, and you're pushing old wax around instead of lifting it. Dilution matters too: too strong and you risk damaging the tile, too weak and you're working twice as hard for half the result. Same with pads. A green pad where you needed black leaves finish behind in the tile's pores.
Stripper is alkaline, and finish wants a clean, neutral surface. Skip the rinse — or the neutralizer on jobs that call for one — and the new wax goes down tacky, cloudy, and prone to scuffing. This is the step crews cut when they're behind schedule, and it's the one the floor never forgives.
Four thin coats beat two thick ones, every time. Thick coats trap solvent, stay soft, and can yellow as they cure. Thin coats dry faster between applications and build a harder, clearer film. If a crew brags about a "heavy coat," that's not craftsmanship. That's a schedule problem dressed up as one.
This is why commercial floor stripping and waxing usually happens after hours: the floor has to stay completely clear while the coats cure — not just dry to the touch. Finish is walkable in hours but doesn't reach full hardness for a day or more, depending on coats, humidity, and airflow. Doors locked, cones out, nobody "just stepping across" for one thing. A lot of botched jobs start with somebody crossing wet finish for a chair or a keyboard.
The number of coats depends on traffic and floor condition. There's no universal spec. A school corridor or a retail entrance needs more coats — often with a sealer down first if stripping exposed bare, porous tile — than a back office hallway that sees five people a day. Stripping a floor that's been neglected for years is a different job than a routine strip on a maintained floor. Anyone quoting coat counts over the phone is guessing, and the guess is usually low.
Grocery-store floor wax and commercial-grade finish are not the same product. Cheap finish walks off at entrances and burns black under burnishing. The finish should match the maintenance plan: if you'll buff or burnish, it needs to be a finish built for it. Products sold for home floors aren't made for commercial traffic, which is one reason residential approaches don't belong on commercial tile.
Done right, a full strip and wax is an occasional event, not an annual certainty. Dust mopping, damp mopping with a neutral cleaner, spray buffing, and periodic scrub-and-recoat keep the finish alive between full strips. Two things kill finish faster than anything else: grit at the entrances (no matting) and the wrong mop-water chemistry — ammonia-based or acidic cleaners will strip the floor you just paid to wax.
Cost drivers on strip-and-wax work: square footage, number of coats, floor condition (old buildup, burn marks, discolored sealer), how much furniture has to be moved, and after-hours scheduling. In most markets, this kind of work lands somewhere in the ballpark of a dollar to two dollars per square foot, with condition and coat count moving that number either way. But a firm price quoted without someone standing on the floor is a guess. We price every job from an on-site walkthrough. That's the only honest way to do it.
Walk the floor first. Move or work around furniture, strip to bare tile, rinse and neutralize, then lay thin coats to the spec the traffic actually demands. Keep the floor closed until cure, then put a maintenance plan behind it. For the full process, coat logic, and scheduling detail, read the floor stripping and waxing pillar page.
One more thing about who's talking here. Best Choice Janitorial Services is a commercial-only cleaning company serving Metro Detroit. We handle general commercial cleaning, floor stripping and waxing, appliance cleaning, commercial kitchen steam cleaning, pressure washing, carpet cleaning, upholstery cleaning, and full commercial janitorial programs for offices, hospitals and medical facilities, industrial and manufacturing buildings, schools, retail, and any other commercial property. No residential work — commercial is the whole business. And to be straight with you: hood and duct cleaning is a separate certified trade, and it's not something we offer.
Get a walkthrough, not a guess.
If your floors are due — or the last crew left you with finish that's peeling — we'll come out, look at the actual floor, and tell you what it needs and what it'll take. Visit https://jan.bestchoice411.com to schedule an on-site walkthrough with Best Choice Janitorial Services, or learn more about our floor stripping and waxing services.